Various Engineer, Lab Technician, Surveyor for Maaden Project (Saudi Arabia)

Engineering & Design Group

Lead Engineer/ Mechanical (Piping)
Candidate must have strong background in piping design including development of Piping Material Classification, layout (plot plan, General Arrangement, etc), Isometric drawings, material take off and produces a bill of materials and working knowledge of stress analysis, trouble shooting experience of piping related failures in operating plants.
Minimum 12 years experience

Sr Engineer/ Mechanical (Rotating)
Candidate must have strong background in Rotating equipment design. Must be able to design, produce datasheets, troubleshoot equipment failures, understand material selection for equipments such as blowers, axial and recirculation pumps, vertical suction pumps, compressor, fans, steam driven turbines.
Minimum 10 years experience

Engineer/ Electrical
Candidate must experience in design review of HV and LV electrical systems, fully conversant with protection and coordination, Transformer mechanical & electrical protection, Switchgear, working with short circuit analysis modules like ETAP, Engineering calculations (MV Overhead line calculations, Breaker sizing, cable sizing, earthing conductor sizing, Generator sizing. LV/MV load calculation analysis); trouble shoot electrical systems like MCC’s, VSD’s, AC/DC motors, transformers, generators, fibre optic cables, electric cables etc
Minimum 08 years experience

Sr Engineer, Mechanical – Material Handling
Strong material handling experience in design & troubleshoot of conveyors (tripper, belt, overland), mining equipment’s (Jaws crushers, Impact, HPGR, rod mills, Wobblers), screening, stacking reclaiming, hopper, bin and chutes, etc
Minimum 10 years experience

 

Engineering & Design PROJECT GROUP :

Engineer contract service
BS Degree in Engineering & PMP is pefered .
Experience in capital project management
Experience in basic and detail engineering requirements, engineering contractor oversight
Technically competent to review engineering progress
Strong track record of successfully completed projects.
Minimum 08 years experience in the same position.

Cost Estimator
Bachelor’s Degree from an accredited college or university in Construction Management, Structural/Civil Engineering or Mechanical engg.
Minimum of 6 years of experience in Chemical, Petro-Chemical, Manufacturing or Mining/Fertilizer industry. Proven & successful track record in directly planning large multi-million dollar projects.
• Experience supporting proposal related activity during all stages of the proposal/acquisition process
• Ability to perform and apply cost/estimating and pricing principles to review, compile and analyze supplier cost and historical data.

Sr. Engineer (Project Engineer)
BS Degree in Engineering or similar
Minimum of 10 years of project planning experience in Chemical, Petro-Chemical, Manufacturing or Mining/Fertilizer industry. Proven & successful track record in directly planning large multi-million dollar projects.
Proven experience in engineering project planning, implementation, analysis, contract interpretation, budget development, critical path planning, and administration of engineering projects.

Sr. Engineer (Project Engineer)
BS Degree in Engineering or similar
Minimum of 10 years of project experience in Chemical, Petro-Chemical, Manufacturing or Mining/Fertilizer industry. Proven & successful track record in directly planning large multi-million dollar projects.
Proven experience in engineering project planning, implementation, analysis, contract interpretation, budget development, critical path planning, and administration of engineering projects.

Sr. Project Engineer
More than 10 years’ experience in relative industry.

Plant Engineer
More than 10 years’ experience in relative industry.

Engineer/Instrument
More than 10 years’ experience in relative industry.

 

QA / QC Laboratory

Analyst
Diploma degree, 4-6 years’ experience in relative industry

Specialist
Bachelor Degree in chemistry, industrial chemistry, geochemistry. More than 10 years’ experience in relative industry.

 

Reliability

Planner, Reliability Professional (Engineer)
Section Head, Upstream Professional (Superintendent)
Engineer, Lubrication Professional (Engineer)
Engineer, Rotating Professional (Engineer)
Engineer, Inspection
Engineer, Condition Monitoring

Process Engineering

Superintendent, Process Engineering (Bene)
·       Mining, Chemical or Mechanical Engineer with relevant experience
·       Must have a minimum of 4 years of leadership experience in plant operation, process engineering, ore beneficiation, mineral processing or similar experience.
·       Experience and ability to review beneficiation design, management and interpretation of mineralogy studies, and the interaction of the plant capability with respect to ore processing performance.
·       Must have strong leadership skills directing engineers and full understanding of plant operations and process engineering.
·       15 years minimum

Senior Engineer, Process (Bene)
·       Mining, Chemical or Mechanical Engineer with relevant experience
·       Must have a minimum of 5 years of experience in plant operation, process engineering, ore beneficiation, mineral processing or similar experience.
·       Design, manage and interpret bench-scale laboratory experiments aimed at understanding the mineral dressing characteristics of ore body and constituents aimed at understanding the process and implement solutions based on findings.
·       Design, manage and interpret pilot plant demonstrations of the beneficiation processes
·       Provide process specific technical input into team project work and provide input and evaluation into recovery estimates along with acting as the process lead on studies and projects
·       10 years of total experience minimum

Engineer, Process (Bene)
·       Mining, Chemical or Metallurgical Engineer with relevant experience
·       Must have a minimum of 4 years of experience in plant operation, process engineering, ore beneficiation, mineral processing or similar experience.
·       Execute bench-scale laboratory experiments aimed at understanding the mineral dressing characteristics of ore body and constituents aimed at understanding the process and implement solutions based on findings.
·       8 years minimum

Senior Engineer, Process (SAP/Utilities)
·       Utilities system design which includes steam systems, water systems, power generation, air systems, fuel gas, water treatment, etc.
·       Must have 5 years plant experience in utilities, sulfuric acid facility construction, commissioning, or operations.
·       Must be able to perform Hazop, Hazid, SIF and SIL verification and Validation.
·       Must be strong in utilities heat and mass balances
·       10 years minimum

Engineer, Process (SAP/Utilities)
·       Utilities system design which includes steam systems, water systems, power generation, air systems, fuel gas, water treatment, etc.
·       Must have 4 years plant experience ( construction, commissioning, or operation)
·       Must be able to perform Hazop, Hazid, SIF and SIL verification and Validation.
·       Must be strong in utilities heat and mass balances
·       8 years minimum

Engineer, Process (PAP)
·       Utilities system design which includes steam systems, water systems, power generation, air systems, fuel gas, water treatment, etc.
·       Must have 4 years plant experience ( construction, commissioning, or operation)
·       Must be able to perform Hazop, Hazid, SIF and SIL verification and Validation.
·       Must be strong in utilities heat and mass balances
·       8 years minimum

Engineer, Chemical
·       Chemical Engineer
·       Completed PDP Program
·       Motivated to remain at WAS to learn the plant and its processes
·       Understands chemical processing and engineering concepts
·       Can perform heat and mass balances
·       2 to 3 years minimum

Engineer, Process (PAP)
·       Chemical Engineer
·       Must have 4 years plant experience in phosphoric acid plant engineering, commissioning or operations.
·       Must be able to perform heat and mass balances and other process engineer duties.
·       Be able to design and implement process engineering studies, pilot test and plant trials.
·       8 years of experience minimum

Process Engineer (Bene)
·       Chemical or Mine Processing Engineer
·       Must have 4 years plant experience in construction, commissioning, or operations
·       Must be able to perform material balance, water studies and other process engineer duties.
·       Must have a minimum of 4 years of experience in plant operation, process engineering, ore beneficiation, mineral processing or similar experience.
·       Execute bench-scale laboratory experiments aimed at understanding the mineral dressing characteristics of ore body and constituents aimed at understanding the process and implement solutions based on findings.
·       8 years of experience

Senior Engineer, Process (Bene – Dry) – Mechanical, Chemical or Industrial Engineer
·       Mechanical, Chemical, Mining or Industrial Engineer with relevant experience
·       Strong dry material handling experience in engineering design and operation of crushing equipment, sizing, screening, conveyors, transfer points, stackers, bins, hoppers and sampling systems.
·       Must have a minimum of 5 years of experience in plant operation, process engineering, ore beneficiation, mineral processing or similar experience.
·       10 years of total experience minimum

Senior Engineer, Process (Bene – Wet) – Mineralogy Engineering
·       Chemical, Mining or Industrial Engineer with relevant experience
·       Proven process design and plant operation background in slurries, milling, hydrosizing, flotation, thickening, dewatering, concentrates and associate equipment.
·       Strong background in process water usage and treatment is highly desired.
·       Must have 4 years plant experience in construction, commissioning, or operations
·       Design, manage and interpret bench-scale laboratory experiments aimed at understanding the mineral dressing characteristics of ore body and constituents aimed at understanding the process and implement solutions based on findings
·       8 years minimum

Senior Engineer, Process (Downstream Products)
·       Chemical Engineer
·       Must have experience in phosphoric acid derived products and the associated processes
·       Strong ability to develop flow sheets, process diagrams based on utilization of plant products and determine feasibility level estimate.
·       Background in design, manage and interpret bench, pilot and plant scale experiments aimed at understanding process development.
·       Must have 4 years plant experience PAP related process engineering design and operations
·       Must be able to perform HAZOP, HAZID, MOC evaluation.
·       Must be technically strong to validate processes while developing business case for project.
·       8 year minimum experience

Engineering, Civil Geotechnical (Gyp/Tailings/WRF)
·       Civil or Geotechnical Engineer
·       Design background and basic CAD experience
·       Basic understanding of construction, earthwork, geo-membranes and
·       Understand slope stability, tailings operations, waste storage, equipment requirements and planning.
·       Experienced in operating facilities, field modifications, technical evaluation of civil designs and operability of installation
·       5 to 8 year minimum

CAD/Designer, Civil
·       Engineer or Engineering Technician
·       Experience in earthwork construction, site planning, foundations, stockpile design
·       Proficient with CAD systems particularly Microstation CES(gINT) 3D
·       10 years minimum

Surveyor, Engineering
·       Engineering Technician minimum
·       Experience with earthwork construction and site preparation
·       Experience with GPS survey equipment and proper surveying techniques
·       Must be able to work with minimally skilled personnel for field survey
·       5 to 8 years minimum

Technical Advisor – Engineering
·       Chemical, Mechanical or Metallurgical Engineer
·       Must have experience in plant engineering, continuous operations utilities system design which including process systems similar to WAS facilities.
·       Demonstrated strong technical leadership in previous roles.
·       Capable of performing the duties of the Process Engineering Manager (WFSN 702099)
·       20 years minimum

Project Group

Sr. Engineers (Project)
BS Degree in Engineering or similar
Minimum of 10 years of project experience in Chemical, Petro-Chemical, Manufacturing or Mining/Fertilizer industry. Proven & successful track record in directly planning large multi-million dollar projects.
Proven experience in engineering project planning, implementation, analysis, contract interpretation, budget development, critical path planning, and administration of engineering projects.

Submit your CV to cv@hiringindonesia.id